Beech Ovens
E-Series Manual (R4)
Installation Check Sheet
Assembly Check:
□
Exhaust System.
Exhaust Type:
Check that the Exhaust Duct installation is compliant with local regulation.
□
□
Canopy.
Other: ____________________
Gas Connection:
All Gas fittings tight and correctly connected.
Gas control valve and Burner(s) mounted firmly in position.
Gas Type corresponds to that stated on the Data plate located inside the access door.
Burner connected to Gas manifold.
Electrical Connection:
Check that all wiring and cabling is routed correctly.
All electrical components correctly installed – Mains Electricity Supply sufficient earthed and in accordance
with local regulation.
Correct Polarity
(Power (Live) = Brown
Piezo ignition functional
Spark evident.
General Installation Check:
Legs fastened sufficiently to floor (if applicable) – oven is stable in position.
Outer façade panels secure and all fixing screws tightened
Check that the Stainless Steel Hearth is fitted correctly, level with the floor bricks.
Check that the area below and surrounding the oven is clean, tidy and free of debris.
Check to ensure that suitable fire extinguishing equipment is close at hand.
Page 36
□
Fitted Oven Components.
Neutral = Blue
Earth = Green)
2/09/2019 (C)
Confidential and Proprietary
□
Access above and below oven.