Oven Installation Procedure; Removing The Oven From The Crate; Lifting Positions - Beech ovens E Series Installation And Operation Manual

Beech Ovens
E-Series Manual (R4)

Oven Installation Procedure

Prior to installing the oven, visit the installation area and determine if there are
doorways narrower than the oven width. The oven has been designed to fit in most
standard elevators which are capable of the weight.

Removing the oven from the crate

1. Remove the front and top panels from the crate by removing the screws marked
with red paint.
2. Carefully remove the lower plastic wrap to reveal the lower access door.
3. Inside the underside of the oven, you will find 4 x bolts holding the feet to the
pallet.
4. Remove the 4 x nuts.
5. Lift the oven with a forklift in the positions shown below to clear the bolts
protruding through the pallet.
NOTE: Ensure the forks are level and well under both leg braces and be careful
not to damage the front panel when tilting.
6. Slowly and carefully remove the oven from the crate.
Insert forks here.
NOTE: Ensure the forks are level and well
under both leg braces. Be careful not to
damage the front panel when tilting.
Page 12
Confidential and Proprietary
2/09/2019 (C)