Replacing The Char Grill Piezo Battery; Finishing For The Day - Beech ovens E Series Installation And Operation Manual

Beech Ovens
E-Series Manual (R4)

Replacing the Char Grill Piezo Battery

If the Piezo does not spark, it is possible that the battery has expired. To replace the
battery, follow the instructions below.
1. Unscrew the Piezo button.
2. Replace the battery.
(Be sure to insert the new battery with the
poles in the correct direction, + positive
end first).
3. Replace the Piezo button. (Do not
over tighten)
If the Piezo still does not spark – having checked that the battery is OK and fitted
correctly – check that the cable from the Piezo to the pilot is connected and in good
repair. For further
technical@beechovens.com

Finishing for the Day

When you have finished for the day, simply turn the main Gas control switch to OFF and
if you wish, spread the coals. This is not always necessary. Any size fire can be left
burning safely. Some owners put another log on to keep the oven hot overnight. It is
safe to leave the fire burning and the gas switched ON or OFF.
A stainless-steel Plug Door is supplied and recommended for the oven to keep the heat
in overnight.
See the following section Plug Door Placement
Page 45
assistance contact
Confidential and Proprietary
Beech Ovens service
2/09/2019 (C)
department