Selecting The Auto Calibration Type (Calibration Type) - Sony STR-ZA3100ES Help Manual

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Selecting the Auto Calibration type (Calibration Type)

You can select a calibration type after you have performed the Auto Calibration and saved the settings.
Select [Setup] - [Speaker Setup] from the home menu.
1
Select [Calibration Type].
2
Select the setting you want.
3
Full Flat: Makes the measurement of frequency from each speaker flat.
Engineer: Sets to "the Sony listening room standard" frequency characteristics.
Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front
speaker.
Off
Note
This function does not work when [Direct] is being used and an analog input is selected.
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending
on the audio format.
4-686-529-11(5) Copyright 2017 Sony Corporation
190