Sony STR-ZA3100ES Help Manual page 180

IN 1
IN 2
None
VIDEO IN
You can set the composite video input jack(s) assigned to VIDEO IN (VIDEO) or VIDEO IN (AUX) input signal.
AUDIO IN
Indicates an analog signal is being input.
Input Mode
You can set the input mode for each input.
Preset Sound Field
You can assign a default "Sound Field" to each input source that will be selected automatically when you select the input
source.
In-Ceiling Speaker Mode
You can select whether or not to use the In-Ceiling Speaker Mode with the current input.
A/V Sync
You can delay the output of audio to minimize the time gap between audio output and visual display.
Subwoofer Low Pass Filter
You can turn on or off the low-pass filter for the subwoofer output. The low-pass filter works when PCM signals are input
via an HDMI connection. You can set the function for each input to which an HDMI input jack is assigned independently.
Turn the function on if you connect a subwoofer without the crossover frequency function.
Subwoofer Level
You can set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can
set the level for each input to which an HDMI input jack is assigned independently.
Preset Gain Level
You can preset the gain level for each input.
Trigger 1 to 3 (for STR-ZA3100ES)
Trigger (for STR-ZA2100ES/STR-ZA1100ES)
You can select input options for use of the 12V Trigger function.
Related Topic
Changing the name for each input (Name)
Using other video/audio input jacks (Input Assignment)
Switching between digital and analog audio (Input Mode)
4-686-529-11(5) Copyright 2017 Sony Corporation
180