Selecting The Auto Calibration Type [Calibration Type] - Sony STR-DH590 Help Manual

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590

Selecting the Auto Calibration type [Calibration Type]

You can select a calibration type after you have performed the Auto Calibration and saved the settings.
For details on Auto Calibration, refer to the supplied Operating Instructions.
Select [Sound Effect] - [Calibration Type] from the home menu.
1
Press / to select the setting you want.
2
Full Flat: Makes the measurement of frequency from each speaker flat.
Engineering: Sets to "the Sony listening room standard" frequency characteristics.
Front Ref.: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
Off
Note
This function does not work in the following cases:
[Direct] is selected and an analog input is selected.
Headphones are connected.
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending
on the audio format.
4-731-210-11(1) Copyright 2018 Sony Corporation
27