Sony STR-ZA3100ES Help Manual page 143

Input
name
Signals from the current input in main zone
SOURCE
Source signal from the HDMI IN 1 (BD/DVD) jack (*1)
BD/DVD
Source signal from the DIGITAL COAXIAL IN (BD/DVD) jack (*1)
Source signal from the HDMI IN 2 (SAT/CATV) jack (*1)
SAT/CATV
Source signal from the HDMI IN 6 (GAME) jack (for STR-ZA3100ES/STR-ZA2100ES) on the front
GAME
panel or HDMI IN 3 (GAME) jack (for STR-ZA1100ES) (*1)
Source signal from the HDMI IN 3 (STB) jack (for STR-ZA3100ES/STR-ZA2100ES) or HDMI IN 4
STB
(STB) jack (for STR-ZA1100ES)
Source signal from the HDMI IN 4 (VIDEO) jack (for STR-ZA3100ES/STR-ZA2100ES only) (*1)
Source signal from the VIDEO IN VIDEO jack
VIDEO
Source signal from the VIDEO AUDIO IN jacks
Source signal from the DIGITAL OPTICAL IN 1 (AUX) jack (*1)
Source signal from the VIDEO IN AUX jack
AUX
Source signal from the AUX AUDIO IN jacks
Source signal from the DIGITAL OPTICAL IN 2 (TV) jack (*1)
TV
Source signal from the TV AUDIO IN jacks
Source signal from the HDMI IN 5 (SA-CD/CD) jack (*1)
SA-CD/CD
Source signal from the SA-CD/CD AUDIO IN jacks
FM
FM broadcast received through the built-in tuner
TUNER
AM
AM broadcast received through the built-in tuner
TUNER
*1 The following restrictions are set on the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver:
Only 2ch PCM signals are output to Zone 2.
Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.
Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if the
same source signals as the main zone are selected in Zone 2.
If the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio output to
2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.
Note
When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most recently
selected will be set.
If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to [SOURCE] or the same
input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.
Input source
143