Sony STR-ZA3100ES Help Manual page 151

Speakers
TV
Other amplifier/receiver
HDMI cable (not supplied)
Note
The following settings are required for this connection.
Set [HDMI Out B Mode] in the [HDMI Setup] menu to [Zone2]
Set [Zone2 Audio Out] in the [HDMI Setup] menu to [Zone2 AMP]
When outputting optical/coaxial audio signals, set the audio output to PCM on the connected device. For details, refer to the
operating instructions of the connected device.
Connecting another amplifier using the ZONE 3 AUDIO OUT jacks
Speakers
Other amplifier/receiver
Audio cable (not supplied)
Note
Only devices connected to the analog audio input jacks and the built-in tuner (FM/AM) can output signals to Zone 3. No signals
are output from devices connected to only the digital input jacks.
Related Topic
Setting the Zone 2 HDMI audio output of connected devices (Zone2 Audio Out)
151