Sony STR-ZA3100ES Help Manual page 96

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Connecting the receiver to the network using LAN cables (for STR-ZA3100ES)
The following illustration is an example configuration of a home network with the receiver, and a computer.
Computer
LAN cable (not supplied)
Wireless access point, etc.
Network camera, etc.
Router
Modem
Internet
Note
Connect a router to one among ports 1 to 8 of the receiver using only one LAN cable. Do not connect the same router to the
receiver using more than one LAN cable. It may cause a malfunction.
Ports No. 1 and No. 2 support PoE (Power over Ethernet, Alternative A). If you connect a PoE-compatible device to one of these
ports, power will be supplied to the device from the receiver.
You can also connect a device that does not support PoE to the PoE port.
The PoE port lights in red while supplying power.
This receiver supports PoE Class 3.
Related Topic
Notes on connecting cables
Setting up a network (Internet Setup)
4-686-529-11(5) Copyright 2017 Sony Corporation
96