Sony STR-ZA3100ES Help Manual page 178

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Setting up the receiver using the Easy Setup
When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears on the
TV screen. You can set up the following settings for the receiver by following the instructions on the Easy Setup screen.
Auto Calibration
Check your speaker system and perform automatic calibration according to the configuration and arrangement of
your speaker system.
Internet Setup
Configure settings to connect the receiver to the network.
Note
Switch the input of the TV to the input to which the receiver is connected to use this function.
If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by
selecting [Setup] - [Easy Setup] from the home menu.
Related Topic
1. About Auto Calibration
2. Before you perform Auto Calibration
3. Connecting the calibration microphone
4. Selecting the front speakers
5. Performing Auto Calibration
6. Checking Auto Calibration results
Setting up a network (Internet Setup)
4-686-529-11(5) Copyright 2017 Sony Corporation
178