Sony STR-ZA3100ES Help Manual page 136

Multi channel av receiver
Hide thumbs Also See for STR-ZA3100ES:
Table of Contents

Advertisement

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Adjusting the crossover frequency settings for IMAX Enhanced content playback
(IMAX ADJUSTMENT)
When you watch IMAX Enhanced content, the following settings are deactivated so as not to interfere with the sound of
the content.
[2.11. CROSSOVER FREQUENCY]
[4.6. SUBWOOFER LOW PASS FILTER]
However, IMAX Enhanced content may not be reproduced adequately depending on the size and specifications of your
speakers.
If adjustment is necessary when watching IMAX Enhanced content, perform the following operations.
The function only works when a DTS stream is input.
Adjusting the crossover frequency for front, center, surround, and/or height speaker output
Adjusting the crossover frequency for the subwoofer output
Adjusting the crossover frequency for front, center, surround, and/or height speaker output
1.
Press AMP MENU.
The menu is displayed on the display panel of the receiver.
2.
Press
/
repeatedly to select [4. AUDIO SETUP], then press
3.
Press
/
repeatedly to select [4.13. IMAX ADJUSTMENT], then press
4.
Press
/
repeatedly to select [4.13.1. HPF/CROSSOVER], then press
5.
Press
/
repeatedly to select the speaker for which you want to adjust the crossover frequency, then press
You can select from the following speakers.
For the STR-ZA3100ES/ZA2100ES: FRONT, CENTER, SURROUND, HEIGHT1 or HEIGHT2
For the STR-ZA1100ES: FRONT, CENTER, SURROUND or HEIGHT
6.
Press
/
repeatedly to select a setting between 40 Hz and 200 Hz, then press
Adjusting the crossover frequency for the subwoofer output
1.
Press AMP MENU.
The menu is displayed on the display panel of the receiver.
2.
Press
/
repeatedly to select [4. AUDIO SETUP], then press
3.
Press
/
repeatedly to select [4.13. IMAX ADJUSTMENT], then press
4.
Press
/
repeatedly to select [4.13.2. LPF FOR SUBWOOFER], then press
5.
Press
/
repeatedly to select a setting between 40 Hz and 200 Hz, then press
Note
The setting value for surround speakers is applied to surround back speakers.
.
.
.
.
.
136
.
.
.
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-za2100esStr-za1100es

Table of Contents