Sony STR-ZA3100ES Help Manual page 102

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Notes on installing the receiver
Do not install the receiver in a confined space, such as a bookcase.
Sufficient space around the receiver is needed to release heat. When placing the receiver in a rack, leave more than
44.45 mm (1.75 in) space above the receiver, and more than 44.45 mm (1.75 in) space along the sides of the
receiver. The rack behind the receiver should be open. If you place the receiver with its back against the wall, leave
more than 88.9 mm (3.5 in) space between the receiver and the wall.
Make sure to use a "WS-RE1" dedicated rack mount kit for this receiver when mounting the receiver on a rack
mount.
Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver.
Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical
shock.
Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.
Magnets are attached to both the front panel and front cover. Do not place cards with magnetic stripes, such as bank
cards or ID passes, near the receiver. These cards may become unusable due to the effects of the magnets on the
receiver.
4-686-529-11(5) Copyright 2017 Sony Corporation
102