Sony STR-ZA3100ES Help Manual page 146

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Connecting 5.1-channel speaker system with Zone 2 connection
Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see
Monaural audio cable (not supplied)
Speaker cable (not supplied)
After you have made the Zone 2 speaker connection, set [SB Speaker Assign] to [Zone2] in the [Speaker Setup] menu.
Note
After you have installed and connected your speakers, set the speaker pattern to [5.1] using [Speaker Pattern] in the [Speaker
Setup] menu.
You can only set [SB Speaker Assign] if a speaker pattern in which speakers are not connected to the SPEAKERS SURROUND
BACK/HEIGHT(FRONT B/BI-AMP/ZONE 2) terminals is selected.
Connect speaker cables properly with the polarities (+/–) matched between the speaker cables and the SPEAKERS terminals.
Related Topic
Locations and names of speakers
Installing 5.1-channel speaker system with Zone 2 connection
"How to connect speaker
146
cables."