Sony STR-ZA3100ES Help Manual page 12

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Front panel (without the front cover attached)
1.
Fixing points for the front cover
Attach the front cover using these points.
2.
PING
Displays the IP address and MAC address on the display panel.
3.
Input buttons
Select the device you want to use.
4.
TONE MODE , TONE+/–
Press to adjust the bass/treble level of the speaker.
5.
SPEAKERS
Select the front speaker system (FRONT A speakers, FRONT B speakers or both FRONT A and FRONT B
speakers) or turn off the speaker output.
6.
CALIBRATION MIC jack
Connect the supplied calibration microphone to this jack to perform Auto Calibration.
7.
HDMI OUT
Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B (ZONE 2) jacks.
8.
SETTING (USB) port
Used for maintenance and service.
9.
ZONE CONTROL (ZONE2, ZONE3)
Selects the location to be controlled.
10.
MEMORY
Press to store a station during tuner operation.
11.
CUSTOM PRESET (1, 2, 3, 4)
Saves and recalls various settings for the receiver.
12