Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Connecting 7.1-channel speaker system
Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see
Monaural audio cable (not supplied)
Speaker cable (not supplied)
Note
After you have installed and connected your speakers, set the speaker pattern to [7.1] using [Speaker Pattern] in the [Speaker
Setup] menu.
Connect speaker cables properly with the polarities (+/–) matched between the speaker cables and the SPEAKERS terminals.
Related Topic
Locations and names of speakers
Installing 7.1-channel speaker system
Speaker configuration and speaker pattern settings
Assigning the surround back speaker terminals (SB Speaker Assign)
Selecting the speaker pattern (Speaker Pattern)
"How to connect speaker
41
cables."