Sony STR-ZA3100ES Help Manual page 225

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Enjoying content of a connected device without turning on the receiver (Standby
Through)
You can output HDMI signals to the TV even when the receiver is in standby mode.
Select [Setup] - [HDMI Setup] from the home menu.
1
Select [Standby Through].
2
Select the setting you want.
3
Auto: The receiver outputs HDMI signals to the TV from the HDMI OUT A jack when the TV is turned on while
the receiver is in the standby mode.
Sony recommends this setting if you are using a "BRAVIA" Sync-compatible TV manufactured by Sony. This
setting saves power in the standby mode compared to the [On] setting.
On: The receiver continuously outputs HDMI signals from the HDMI OUT A jack when in standby mode.
Off: The receiver does not output HDMI signals when in standby mode. This setting saves power in the standby
mode compared to the [On] setting.
Note
When the receiver is in standby mode, the
[On] or [Auto].
The top of the cabinet may become hot. This is because part of the circuit(s) inside the receiver is(are) still turned on, and is not a
malfunction.
When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV than when [On] is selected.
This function does not work for the HDMI OUT B (ZONE 2) jack.
(power) indicator on the front panel lights up in amber if [Standby Through] is set to
4-686-529-11(5) Copyright 2017 Sony Corporation
225