Sony STR-ZA3100ES Help Manual page 47

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Connecting 7.1.2-channel speaker system using front Dolby Atmos enabled speakers
with an additional stereo power amplifier (for STR-ZA3100ES/STR-ZA2100ES)
Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see
Monaural audio cable (not supplied)
Speaker cable (not supplied)
Audio cable (not supplied)
Stereo power amplifier (not supplied)
Note
After you have installed and connected your speakers, set the speaker pattern to [7.1.2 (FD)] using [Speaker Pattern] in the
[Speaker Setup] menu.
Connect speaker cables properly with the polarities (+/–) matched between the speaker cables and the SPEAKERS terminals.
"How to connect speaker
47
cables."