Channel Setup - Honeywell MBeacon User Manual

8.2.2

Channel Setup

All units in a network must operate on a single channel. The available
channels vary by the internal wireless modem's frequency, and channel
ranges are set by RAE Systems to correspond with the wireless modem
frequency. The frequency is set at the factory according to
country/region.
These are the modem frequencies and channel ranges:
869 MHz:
Channel 0 (channel cannot be changed)
900 MHz:
Channels 1 through 10
Press [MODE] to view or change the channel. The range of available
channels is shown in parentheses. The screen also shows the channel
number, with the cursor blinking on the first digit:
MBeacon User's Guide
25