Resolution; Vol Co 2 (Co 2 Sensors Only) - Honeywell BW GasAlertMicro 5 User Manual

Resolution

The Resolution option displays the gas
measurement using Regular or Extra
resolution.
Regular: Displays gas measurement in
1 ppm increments.
Extra: Displays the gas measurement in
0.1 ppm increments.
Regular resolution for O
extra resolution is 0.01 ppm.
The Resolution option is not available for CO, O
and CO sensors.
2
After selecting the desired sensor, press H to scroll to Resolution.
Press C within 20 seconds to confirm.
A check displays in the checkbox of the
currently selected resolution. To select the
other resolution, press H to move the
check to other resolution. Press C to
confirm the selection.
The detector is shipped with Regular
resolution enabled for applicable sensors.
Find Quality Products Online at:
Note
and ClO sensors is 0.1 ppm, while
3 2
, LEL, PID,
2
GlobalTestSupply
www.
%Vol CO (CO Sensors Only)
2
2
If the %vol CO is enabled, the detector
2
displays the carbon dioxide (CO
readings as %vol (0.0).
From the Sensors option menu, select
CO .
2
Press H to scroll to %vol CO
to toggle between enable and disable.
Confirmation is not required. If no buttons
are pushed, after 20 seconds the detector
returns to the sensor selection screen.
The change is saved automatically.
The detector is shipped with %vol CO
disabled.
Correction factors are not applicable to the CO
.com
GasAlertMicro 5/PID/IR
User Options Menu
)
2
. Press C
2
2
Note
sensor.
2
sales@GlobalTestSupply.com
29