Reader And Antenna Holders; Overview; Ordering Data; Mounting With The Simatic Antenna Holder - Siemens SIMATIC RF600 System Manual

10.3

Reader and antenna holders

10.3.1

Overview

The following read points (readers and antennas) have a standardized VESA 100 mounting
system (4 x M4) and can be secured with a SIMATIC antenna holder:
● SIMATIC RF610R, RF615R, RF650R, RF680R, RF685R
● SIMATIC RF640A, RF642A, RF650A, RF660A, RF680A
10.3.2

Ordering data

Table 10- 13 Ordering data for SIMATIC antenna holder
Description
SIMATIC antenna holder for RF600 devices
10.3.3

Mounting with the SIMATIC antenna holder

Flexible mounting is possible with the SIMATIC antenna holder. The RF600
readers/antennas can be rotated in any direction with this holder.
Follow the steps below to mount the SIMATIC antenna holder with the reader or the antenna
on the wall:
1. Install the wall mounting plate (A) on the wall.
2. Install the articulated joint (B) with the screws
3. Fasten the reader or the antenna using the four bore holes on the antenna mounting plate
(C).
4. Mount the antenna mounting plate (C) into the articulated joint (B) and fasten it with the
help of screws
5. Align the SIMATIC antenna holder by sliding the setting angle on the articulated joint (B)
and tighten all the screws.
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
②
to the articulated joint (B).
10.3 Reader and antenna holders
Article number
6GT2890-2AB10
①
on the wall mounting plate (A).
Accessories
497