Configuration/Integration - Siemens SIMATIC RF600 System Manual

5.4.4

Configuration/integration

An Ethernet interface is available for integrating the device into system
environments/networks. The RF650R can be configured via the Ethernet interface and with
direct connection to the PC. You can configure and program the reader using the following
tools:
● using Web Based Management (WBM)
● OPC UA or XML based user applications
Note that configuration in parallel is not possible using different tools. Simple process
controls (e.g. a traffic signal) can be implemented directly using the reader via four digital
inputs/outputs.
Figure 5-22
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
Overview: Configuration of RF650R readers
Readers
5.4 SIMATIC RF650R
161