Configuration/Integration - Siemens SIMATIC RF600 System Manual

5.3.4

Configuration/integration

An Ethernet interface is available for integrating the device into system
environments/networks. RF615R can be configured via the Ethernet interface and with direct
connection to the PC. You can configure and program the reader using the following tools:
● STEP 7 Basic/Professional (TIA Portal)
● or via EtherNet/IP
● Web Based Management (WBM)
● OPC UA or XML based user applications
Note that configuration in parallel is not possible using different tools. Simple process
controls (e.g. a traffic signal) can be implemented directly using the reader via the digital
input/output.
Figure 5-13
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
Overview: Configuration of RF615R readers
Readers
5.3 SIMATIC RF615R
137