Ordering Data; Mounting - Siemens SIMATIC RF600 System Manual

Antennas
6.2 SIMATIC RF615A
6.2.2

Ordering data

Table 6- 4
Product
SIMATIC RF615A (ETSI)
SIMATIC RF615A (FCC)
Table 6- 5
Product
Connecting cable between
reader and antenna
6.2.3

Mounting

Two holes for M4 screws are provided for mounting the antenna. The antenna is suitable for
mounting on metallic and non-metallic surfaces.
Note
Maximum read/write range
The maximum read/write ranges are only reached when the antenna is mounted on a
metallic surface with a minimum size of 150 x 150 mm.
Note
Antenna gain depends on the mounting surface
Note that the antenna gain depends on the material of the mounting surface. If the antenna
is mounted on a metallic surface, the antenna gain is -5 dBi. If the antenna is mounted on a
non-metallic surface, the antenna gain is -13 dBi.
234
RF615A ordering data
Ordering data accessories
1 m (cable loss 0.5 dB)
3 m (cable loss 1.0 dB)
5 m, suitable for drag chains
(cable loss 1.5 dB)
10 m (cable loss 2.0 dB)
10 m (cable loss 4.0 dB)
15 m, suitable for drag chains
(cable loss 4.0 dB)
20 m (cable loss 4.0 dB)
40 m (cable loss 5.0 dB)
Article number
6GT2812-0EA00
6GT2812-0EA01
Article number
6GT2815-0BH10
6GT2815-0BH30
6GT2815-2BH50
6GT2815-1BN10
6GT2815-0BN10
6GT2815-2BN15
6GT2815-0BN20
6GT2815-0BN40
System Manual, 06/2019, J31069-D0171-U001-A22-7618
SIMATIC RF600