Simatic Rf600 - Siemens SIMATIC RF600 System Manual

Readers
5.3 SIMATIC RF615R
Permitted ambient conditions
Ambient temperature
Conditions relating to UL approval
Degree of protection
Shock resistant to EN 60068-2-27
Vibrations according to EN 60068-2-6
Design, dimensions and weight
Dimensions (W × H × D)
Weight
Type of mounting
Operation indicator
Status display
Standards, specifications, approvals
Proof of suitability
MTBF
Measured at the output of the antenna socket.
1)
All supply and signal voltages must be safety extra low voltage (SELV/PELV according to
2)
EN 60950). All voltage sources must meet the requirements of limited power sources (LPS) and
NEC Class 2.
Note that, depending on the power consumption, using extension cables > 20 m (6GT2891-
4FN50) may lead to a voltage drop on the reader. This voltage drop can mean that the necessary
minimum voltage on the reader is below the required 20 V.
The values for shock and vibration are maximum values and must not be applied continuously.
3)
These values only apply to mounting using screws.
140
During operation
•
During transportation and storage
•
-25 ... +55 °C
•
-40 ... +85 °C
•
for indoor use only (dry location)
•
Mounting height shall be equal or less than
•
2 m (MS1 classification according UL/IEC
62368-1).
La hauteur de montage doit être égale ou
inférieure à 2 m (classification MS1 selon CEI
62368-1).
IP67
25.5 g
3)
3.1 g
3)
155 × 133 × 45 mm
370 g
VESA 100
4x screws M4 (≃ 1.5 Nm)
6 LEDs
1 LED (enclosure, all-round)
EN 301 489-1 V2.2.0 / EN 301 489-3 V2.1.1 /
EN 302 208 V3.1.1
FCC CFR 47, Part 15 section 15.247
29 years
System Manual, 06/2019, J31069-D0171-U001-A22-7618
6GT2811-6CC10-xAA0

SIMATIC RF600