Siemens SIMATIC RF600 System Manual page 42

Hide thumbs Also See for SIMATIC RF600:

Table of Contents

RF600 system planning

4.3 Antenna configurations

Antenna configuration 2

Antenna configuration 3

Description/ application areas

This arrangement of antennas is appro-

priate when the transponders to be read

are only located on one side of the items

to be identified, e.g. when pallets are to

be identified and it is known on which

side the transponders to be read are

Description/ application areas

Preferred for the identification of goods

at loading gates: The transponder is

located in the radiation field of two an-

tennas; for reliable transponder reading,

the height of the transponders above

floor level must therefore be known with

reasonable accuracy.

System Manual, 06/2019, J31069-D0171-U001-A22-7618

SIMATIC RF600