Ordering Data; Planning The Use; Range When Mounted On Flat Metallic Carrier Plates - Siemens SIMATIC RF600 System Manual

Transponder
7.7 SIMATIC RF620T
7.7.2

Ordering data

Table 7- 19
Product
SIMATIC RF620T
Spacer for SIMATIC RF620T
Delivery format
SIMATIC RF620T is supplied in the following form:
● 20 transponders per packaging unit
Minimum order quantity: 1 packaging unit (20 units)
7.7.3

Planning the use

7.7.3.1

Range when mounted on flat metallic carrier plates

The transponder generally has linear polarization. The polarization axis runs as shown in the
diagram below. When using a circular antenna and when the transponder is centrally
mounted on a plane metal plate, which may either be almost square or circular, it can be
aligned in any direction. When using a linear antenna, the polarization axes of antenna and
transponder must always be aligned in parallel.
Figure 7-17
400
Ordering data RF620T
Optimum positioning of the transponder on a (square or circular) metal surface
Article number
6GT2810-2HC81
6GT2898-2AA00
System Manual, 06/2019, J31069-D0171-U001-A22-7618
SIMATIC RF600