7.10
SIMATIC RF640T
7.10.1
Characteristics
SIMATIC RF640T transponder is a passive (i.e. battery-free) and maintenance-free, round-
shaped data carrier. It operates based on UHF Class 1 Gen 2 technology and is used to
save the "Electronic Product Code" (EPC) of 96 bits/240 bits. The transponder also has a
512-bit user memory.
The areas of application are industrial asset management, RF identification of tools,
containers and metallic equipment.
The tool tag is small and rugged and suitable for industrial applications with degree of
protection IP68. It is highly resistant to oil, grease and cleaning agents.
SIMATIC RF640T should preferably be mounted directly on a flat metal surface of at least
150 mm in diameter.
SIMATIC RF640T
Depending on the environment, the reader/the antennas and the set power
1)
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
Characteristics
Area of application
Frequency range
Air interface
Polarization
Memory
Read range
Mounting
Mounting
7.10 SIMATIC RF640T
Identification tasks in rugged industrial envi-
ronments Suitable for use in hazardous are-
as.
ETSI: 865 to 868 MHz
•
FCC: 902 to 928 MHz
•
According to ISO 18000-63
Linear
EPC: 96 ... 240 bits
•
User memory: 64 bytes
•
Max. 4.0 m
1)
2 x M4 screws
Designed for direct mounting on conductive
materials (preferably metal).
Transponder
421