Connecting The Antenna - Siemens SIMATIC RF600 System Manual

Hide thumbs Also See for SIMATIC RF600:
Table of Contents

Advertisement

6.8.4

Connecting the antenna

The SIMATIC RF680A antenna must be connected to the reader using an antenna cable.
Preassembled standard cables in lengths of 1 m, 3 m, 5 m, 10 m, 15 m, 20 m and 40 m are
available to connect the antenna.
NOTICE
Connecting the antenna
Do not connect the adaptive antenna RF680A during operation. Only connect the antenna
to a reader that has been switched off and then restart the reader.
The range of the antenna is limited by the cable loss. The maximum range can be achieved
with the cable 6GT2815-0BH10 (length 1 m), since this cable has the lowest cable loss.
Requirement
Note
Use of Siemens antenna cables
To ensure optimum functioning of the antenna, it is recommended that a Siemens antenna
cable be used in accordance with the list of accessories.
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
Antennas
6.8 SIMATIC RF680A
341

Advertisement

Table of Contents
loading

Table of Contents