Registering And De-Registering Handsets; Automatic Registration - Siemens Gigaset Classic 4015 Operating Instructions Manual

Gigaset 4015 Classic, GBR, A31008-G4015-J101-1-7619

Registering and de-registering handsets

Press keys:
. . .
1 2
G
32
Registering and de-registering
handsets
To be able to make calls with your handset, you must
6
"introduce" it to its base station (registering). This is
very simple and occurs automatically.
Handsets of the Gigaset 2000/3000 families and
non-Siemens handsets must be registered manually.

Automatic registration

Gigaset 4000 handsets at the
Gigaset 4010/4015 base station
Automatic registration ("introducing") is only possible
for the supplied handset and any other G4000 hand-
sets bought additionally. Before activating your hand-
set, place it in the base station with the display
facing upward. After approx. 1 minute, the handset's
internal number is displayed (e.g. " 1 ").
Œ
Make sure that you do not press the On/Off

key
station. If you have inadvertently activated the
handset, please deactivate it.
The next unassigned internal number (1 – 6) is auto-
matically assigned to the handset. If all numbers are
assigned, the internal number 6 is re-assigned. The
handset which was registered under number 6 is then
deregistered.
It is possible to assign a different internal number (see
page 35) or a different internal name (see page 35) to a
handset later.
mobilt_an.fm
before placing the handset in the base
14.09.01