De-Registering Handsets; Locating A Handset ("Paging"); Making Internal Calls - Siemens Gigaset E490 User Manual

Using several handsets

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset E49H
handset.
u
Open list of internal partici-
pants.
The handset you are currently
using is indicated by <.
s
Select the internal participant
you wish to deregister.
Open menu.
§Options§
De-reg. H/Set No.
Select and press
~
Enter the current system PIN
and press
Press the display key.
§Yes§

Locating a handset ("paging")

You can locate your handset using the
base station.
¤
Briefly press the registration/paging
key on the base station (page 1).
¤
All handsets will ring simultaneously
("paging"), even if the ringers are deac-
tivated.
Ending paging
¤
Briefly press the registration/paging
key on the base station or press the talk
key c on the handset.

Making internal calls

Internal calls to other handsets registered
to the same base station are free of
charge.
Calling a specific handset
u
Initiate internal call.
~
Enter the number of the hand-
set.
46
.
§OK§
.
§OK§
Or:
u
Initiate internal call.
s
Select handset.
c
Press the talk key.
Calling all handsets ("group call")
u
Initiate internal call.
*
Press the star key. All handsets
are called.
Ending a call
a
Press the end call key.
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
u
Open the list of handsets.
The external participant hears
hold music if activated
¢
( page 54).
s
Select a handset or
press
§OK§
When the internal participant answers:
¤
If necessary announce the external call.
a
Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or the line is busy, press the display key
to return to the external call.
§End§
When transferring a call you can also press
the end call key a before the internal
participant answers.
Then, if the internal participant does not
answer or the line is busy, the call will
automatically return to you (the display
will show Recall).
and
Call All
.