Table of Contents
Advertisement
SMS (text messages)
¤
Save changes (page 46).
Note:
Ask your service provider for details of how
you should enter service numbers if you wish
to use personal mailboxes (requirement: your
service provider supports this function).
Sending a SMS through another SMS
centre
¤
Activate the SMS centre (2 to 4) as
send
centre.
¤
Send the SMS.
This setting only applies to the SMS that is
being sent next. Afterwards, the setting
automatically changes back to
Service
Centr.
1.
SMS info services
You can have your service provider send
you certain information (e.g. weather
forecast or lottery numbers) via SMS. Up
to 10 info services can be stored. You can
obtain information about the info services
available and their costs from your service
provider.
Setting up/ordering an info service
Ordering an info service
¢
¢
v
î
SMS Service
s
Select info service.
Press the display key.
§Send§§
Setting up an info service
¤
Select info service (see above). Now:
Press the display key.
§View§
Press the display key.
§Edit§
~
If necessary, enter code, desig-
nation and destination
number.
Press the display key.
§Save§
Changing the entry of an info service
¤
Select info service (see above). Now:
Press the display key.
§View§
Press the display key.
§Edit§
~
If necessary, change code,
designation or destination
number.
Press the display key.
§Save§
Deleting an info service
¤
Select info service (see above). Now:
Open menu.
§Options§
Delete Entry
Select and press
.
§OK§
SMS to a PABX
u
You can only receive a SMS when the
Calling Line Identification is for-
warded to the extension of the PABX
(CLIP). The CLIP of the phone number
for the SMS centre is evaluated in your
Gigaset.
u
If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX e.g. by send-
ing a text message to your own
number: once with and once without
the access code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS on ISDN
PABXs is only possible via the MSN
number assigned to your base station.
Page 28
Advertisement
Table of Contents
