Seat & Back Rest Angling - R82 Panther User Manual

SEAT & BACK REST
GB
ANGLING
To tilt the seat:
Press down the pedal (A) under the seat, re-
leasing the gas spring. Adjust by grapping the
handles. The angle between the back and seat
remains the same.
To angle the Back Rest:
Pull the wire (B) behind the back rest below
while holding and adjusting the back rest with
the other hand.
When the back rest is reclined, the handles can
be turned for easier pushing. Loosen the screws
(C), push the knobs on the sides, and turn the
handles 180 until the knobs pop out again.
o
Tighten the screws.
C
13
A
B
-3°
+6°
+15°
+24°
+33°
G
B