Common Parameter Settings - Fuji Electric FRENIC-HVAC Series Instruction Manual

COMMON PARAMETER SETTINGS

Also refer to the FRENIC-HVAC drive's User's Manual (24A7-E-0069*) located on the
CD provided as part of the documentation package for additional information.
Factory-set drive parameters and settings
These parameters and settings are pre-set from the factory for the combination VFD to
be operational. If, for some reason, the drive parameters are reinitialized, these
parameters must be reset for correct panel operation.
Drive function codes:
•
F01 = 3
•
F02 = 1
•
F31 = 0
•
F32 = 0
•
F35 = 0
•
E01 = 1007
•
E02 = 134
•
E22 = 55 (If damper control option is provided)
•
E24 = 0
•
E27 = 99
•
H08 = 1
•
H96 = 1
•
H118 = 60
Drive Switches:
•
SW1 set to SINK
•
SW5 set to C1
*Note: The above parameters are stored in the VFD keypad in KP1 location. Refer to the
Instruction Manual for further details for copying the function code settings to and from
the keypad.
Page 28 of 37