Panel Identification - Fuji Electric FRENIC-HVAC Series Instruction Manual

Panel Identification

Each FRENIC-HVAC Combination VFD has a nameplate label, like the example
pictured above, which contains important information about the panel. This label is
located on the inside of the hinged door or cover of the enclosure.
CAUTION
•
Refer to the nameplate label to determine the panel input voltage and current
requirements prior to installation and wiring.
•
Refer to the nameplate label for the correct wiring diagram (Elementary Drawing).
•
Sizing of field wiring conductors should be based upon the current ratings listed on
the nameplate label.
Page 4 of 37