Function code settings can be changed using the (UP) and (DOWN) keys on the
keypad. Pressing (SET) saves the changes, while pressing (RESET) discards the
changes, and both return to the previous menu.
The most frequently modified parameters can be accessed in the 'Quick-Setup' menu
(item 0 on the programming menu screen). All parameters can be accessed by opening
the 'Function Code' menu (item 2 on the programming menu screen), then opening
'Data Set' (item 1 on the PRG>2 menu screen).
Recommended user-set drive parameters
These parameters are all in the
•
F07 Acceleration Time
•
F08 Deceleration Time
•
F10/F11 Electronic Overload
•
F14 Restart Settings. Refer to drive instruction manual
•
F26 Motor Sound (carrier frequency)
•
P02 Motor Capacity (HP)
•
P03 Motor FLA
•
P04 Motor Tuning. Refer to drive instruction manual
drive Quick-Setup menu for easy access.
FRENIC-HVAC
Page 31 of 37