Section 3 Programming
3-1 Parameter Setting
In the high-speed counter parameter setting of the basic unit, specify the channel to be used, counter mode and digital filter time
of the input. This subsection describes how to set them.
3-1-1 High-speed counter setting
<Setting procedure>
1) Right-click the basic unit on the system definition screen, and then left-click [Properties]. The "Module properties" dialog box
opens.
2) Click the [Parameter] button on the "Module properties" dialog box to display the "Basic unit parameter" dialog box.
Click the "High-speed counter setting" tab and then make the high-speed counter or delay timer settings of the channel to be
used.
3-1