Fuji Electric FRENIC-HVAC Series Instruction Manual page 30

Programming the FRENIC-HVAC Combination VFD
(cont'd)
To set drive parameters using the keypad, first make sure the drive is stopped.
Parameters cannot be changed while the drive is running. To enter the programming
menu, press the Program Key (PRG) on the keypad. To return to the previous screen,
press (RESET) or to completely exit programming from any menu press (PRG). To
select a menu item, use the (UP) and (DOWN) keys on the keypad, then press the
(SET) key to go to that screen. Refer to the diagram below for an example of navigating
the menu:
Page 30 of 37