•
Drive Run output:
o VFD terminals Y5A & Y5C for NO contacts rated for 0.3A @ 250VAC max & 0.5A
@ 48VDC
o Used for monitoring drive run status
•
Drive Fault output:
o VFD terminals 30A & 30C for NO contacts rated for 0.3A @ 250VAC max & 0.5A
@ 48VDC
o VFD terminals 30B & 30C for NC contacts rated for 0.3A @ 250VAC max & 0.5A
@ 48VDC
o Used for monitoring drive fault status
See the FRENIC-HVAC Instruction Manual -
information regarding the drive control connections.
Common
Page 21 of 37
for additional
INR-SI47-1707c-JE