Fuji Electric FRENIC-HVAC Series Instruction Manual page 27

Setting up Local Control
Also refer to the following section Programming the Combination VFD
FRENIC-HVAC
and the drive Instruction Manual (INR-SI47-1707c-JE) for more
FRENIC-HVAC
information.
The
Combination VFD was intended to be integrated into a building
FRENIC-HVAC
automation system and controlled by remote signals. If these signals are not available,
the combination VFD can be set up to be operated locally. Follow these steps to set the
panel up for local operation:
1. Use HELP/REM/LOC button.
The HVAC Combination VFD can now be operated directly using the drive keypad.
Page 27 of 37