Fuji Electric FRENIC-HVAC Series Instruction Manual page 18

Wiring Overview
(cont'd)
Power Wiring (Motor Leads)
The customer power output (motor leads) wiring connects directly to the U, V, and W
terminals on the drive. The following picture shows wiring connections that are available
on FRENIC-HVAC drives:
** Note **
The enable jumpers (PLC to EN1 & EN2) have been removed from the following pictures
for clarity of illustration. DO NOT remove these jumpers unless specific use of these
terminals is required for the application. Please reference the FRENIC-HVAC User's
Manual (24A7-E-0069*) for details on utilizing EN1 & EN2 terminals.
Page 18 of 37