Specifications For Servo Drive - Doosan Vision DVSD-TA Series Operation Manual


1.4 Specifications for Servo Driver
Applied motor capacity
Rated current
Maximum current
Rotation speed
Main input voltage
Control period
Control method
Control mode
Control circuit
Encoder Spec.
I/O Terminal block
Protection
Functions
Ambient temperature
Ambient humidity
Preservation temperature
Altitude
Vibrations
Mounting
0.8KW / 1.5KW / 2.0KW
14A rms
40A peak
2000rpm / 3000rpm (Rated / Maximum)
3 phase 200/220V +10%～-15%, 50/60HZ ±5%
IPM full wave rectified, transisterized PWM control
position, speed, torque control
3 phase Voltage PWM Inverter Driving (IPM)
Full Digital Vector Control (Position detection by Pulse Encoder)
Type
Resolution
Input electric power (R, S, T), Ouput electric power (U, V, W),
Over voltage, under voltage, over current, over speed,
over load, encoder error and etc.
Setting Parameter, Diagnosis, Alarm Display, Status Display
Below 90%RH (don't be covered with dew)
DOOSAN SERVO
Specifications
3.0KW / 4.0KW
28A rms
80A peak
μ
125 sec
Absolute Encoder
17bit (131072)
0～50 ,
-20～85
Below 1000m
Below 0.5G
Rack Mount
Ground (E)
3