3.4.8 Function data output signal test
▷
This makes it possible to test the sequence or the connection by forcing the function data output
signal to be displayed externally.
⇩
SET
P_0 signal OFF
⇩
SET
⇩
P_7(VPF) signal OFF
⇩
SET
3.4.9 Manufacturer's management code
; This is the code managed by the manufacturer
3.4.10 Jog operation
▷
The drive self operates regardless of external signals.
▷
When setting the zero-point, use this to move the ATC to its initial position.
Press the UP or DOWN key and meanwhile the driver will rotate according to the fixed speed of
parameter 27.
⇩
SET
⇩
CW rotation
⇩
SET
; Press the SET key and set the output data.
⇦ ⇨
⇦ ⇨
Resumes to initial display
; Press the SET key and the SVON signal will automatically
turn ON, and it will change to Jog run mode.
; Jog run mode
CCW rotation
; Resumes to initial display mode
P_0 signal ON
P_7(VPF) signal ON
⇩
DOOSAN SERVO
74