Doosan Vision DVSD-TA Series Operation Manual page 40


3.3.5 Motor running speed
The running speed of the motor is displayed in RPM unit. The changes of the speed cannot be seen du
e to inner filtering process. (To view the speed changes, use the monitor output)
In case the motor is running clock wise, a '-' will be displayed.
; motor running speed
; minus rpm display (-1000rpm)
3.3.6 Absolute encoder rotation count
Displays the running count of the absolute encoder inside the motor. (1 count per rotationt)
When the count exceeds 8191, it will resume to '0'.
; absolute encoder running speed count
3.3.7 Absolute encoder - one rotation
Displays the pulse count per rotation of the absolute encoder. (8192 count per rotation)
When the count exceeds 8192, it will resume to '0'.
; absolute encoder pulse count per rotation
3.3.8 Effective load ratio
The effective load is displayed in %. If the ratio is in the minus, a '-' will be displayed and it will resume
to '0' when the SVON signal is OFF.
3.3.9 Maximum load ratio
The maximum load is displayed in %. While the SVON signal is ON, it will always display the maximum
ratio and to resume to '0', press the operator SET key. If the ratio is in the minus, a '-' will be displaye
d and it will resume to
; maximum load ratio
; minus ration display (-250%)
; effective load ratio
; minus ratio display (-100%)
'0' when the SVON signal is OFF.
display range [-3000 ～ 3000]
display range [0 ～ 8191]
display range [0 ～ 8191
display range [-300.0 ～ 300.0]
display range [-300.0 ～ 300.0]
DOOSAN SERVO
35