Doosan Vision DVSD-TA Series Operation Manual page 33


⑤ Press SET key and the dot will appear below the first two segments. The data will be stored.

If NC makes a point of contact (OVR1) in a servo driver be fixed to "ON", the servo driver
makes a point of contact (AUX_OUT1) be fixed to "ON". This means that the servo driver is in
JOG mode.

The servo driver is operated in speed set in parameter 27 during activating JOG+ or JOG-.
⇨ ⇨ ⇨
SET
DOOSAN SERVO
28