Doosan Vision DVSD-TA Series Operation Manual page 76


3.4 Diagnosis display
▶
This display will verify the external sequence status and the condition of the system.
▶
It will display the status as shown below on the OP panel LED display of the drive and the
contents are as follows.
3.4.1 Servo ready status
; SVON signal is OFF and the motor is in free status.
; SVON signal is ON and the motor is running.
3.4.2 Sequence I/O signal
▷ Display ON/OFF status of external input signal in 7 segments.
▷ Display ON/OFF status of external output signal in 7 segments.
▶
The I/O display of the 7 segment LED display panel will be displayed when the LED is on and this
will verify ON and OFF. (If it is ON, the LED will be on, if it is OFF, the LED will be off.)
< >
external input signal
<
external output signal
DOOSAN SERVO
>
71