Table of Contents
Advertisement
Encoder pulse per one rotation
This is the encoder pulse per one rotation
Maximum POST number
This sets the maximum POST number. The position data input exceeding the set data is
ignored.
Setting range : 2 ～ 127,
Gear ratio of motor side
This sets the rotation count when the motor rotates accordingly to the POST data set at
parameter 7.
Setting range : 1 ～ 9999,
Gear ratio of machine side
This sets the POST data it should move when the motor rotates accordingly to the set data at
parameter 6.
Setting range : 1 ～ 9999,
Example)
1.
The
machine
is
decelarating ratio be determined so that the turret will rotate 1 time, this is within the 10 POST
movement, thus the value will be set as follows.
Maximum POST data : 10
Gear ratio of motor side : 3075
Gear ratio of equipment side : 1000
2. From MCT type machine, it is 41 POST(41 POT) magazine, and if the motor rotates 101 turns,
and should the decelerating ratio be determined so that the magazine will move 9 POST, the
value will be set as follows.
Maximum POST data : 41
Gear ratio of motor side : 101
Gear ratio of equipment side : 9
POST number of home
Input the POST number that sets the home when setting the machine's zero-point.
Please refer to 'machine home setting method' for more detailed explanation.
Setting range : 1 ～ 127,
divided by four
Outcome value : 12
Outcome value : 33
Outcome value : 12
10
POST
turret
and
Outcome value : 1
if
the
motor rotates
30.75
DOOSAN SERVO
turns
and
should
the
48
Hide quick links:
Advertisement
Table of Contents
