Binning Function - JAI GO-5100MP-USB User Manual

Binning Function

The binning function allows you to combine the signal values of clusters of adjacent pixels to
create improved virtual pixels. Using the function results in images with lower pixel resolution
and higher sensitivity.
This camera performs both horizontal binning and vertical binning via digital addition or
averaging processing.
The following four conditions must be met to use the binning function.
1. [PolarizeImageSelector] is [RawImage].
2. The ROI function, sequencer function, and binning function cannot be used at the
same time.
3. PixelFormat is one of Mono8, Mono10, and Mono10p.
4. [VideoProcessBypassMode] is [Off].
■ When horizontal binning only (2x1)
The signal values of the pixels having polarizers at the same angle are combined. The signal
values of the two pixels indicated by the red frames in the following figure are combined.
The image data output from this camera becomes RawImage with 1232 pixels
(horizontally) x 2056 pixels (vertically).
1232 pixels
■ When vertical binning only (1x2)
The signal values of the pixels having polarizers at the same angle are combined.
The signal values of the two pixels indicated by the red frames in the following figure
are combined.
— 27 —
GO-5100MP-USB