JAI GO-5100MP-USB User Manual page 56

Item
m） ） AI Custom Control ALC
ALC Reference
ALC Area Selector
ALC Area Enable
ALC Area Enable All
ASC Min.
ASC Max.
AGC Min.
AGC Max.
AGC/ASC Control Speed
ALC Status
Setting range
10 〜 95 50
Low Right, Low Right
Low Mid-Right,
Low Mid-Left,
Low Left,
Mid-Low Right,
Mid-Low Mid-Right,
Mid-Low Mid-Left,
Mid-Low Left,
Mid-High Right,
Mid-High Mid-Right,
Mid-High Mid-Left,
Mid-High Left,
High Right,
High Mid-Right,
High Mid-Left,
High Left
True, False True
True, False True
100 〜 13426 100
101 〜 13427 13427
100 〜 1599 100
101 〜 1600 1600
1 〜 8 4
Off, ASC, AGC ー
— 56 —
Default value
Configure JAI ALC settings. These settings
are also used for AGC (auto gain control).
Set the target level for ALC. (unit: %)
Select the area for which to configure
[ALCAreaEnable].
Enable/disable the photometry area
selected in [ALCAreaSelector].
True: Operate ALC with all areas
designated as photometry areas,
regardless of the individual
enabled/disabled photometry area
states configured in
[ALCAreaSelector].
False: Operate ALC according to the
individual enabled/disabled
photometry area states configured
in [ALCAreaSelector].
Set the minimum value for the
ExposureAuto(ASC) control range.
Set the maximum value for the
ExposureAuto(ASC) control range.
Set the minimum value for the
GainAuto(ASC) control range.
Set the maximum value for the
GainAuto(ASC) control range.
Set the response speed for AGC/ASC.
(8 is the fastest.)
Allows confirmation of the current
operation area during ALC operation.
GO-5100MP-USB
Description