JAI GO-5100MP-USB User Manual page 53

Item
i） ChunkDataControl
Chunk Mode Active
Chunk Selector
ChunkEnable
Item
j） Test Control
Test Pending Ack (ms)
Item
k） ） ransportLayerControl
PlayloadSize (B)
DeviceTapGeometry
Setting range
True, False False
Image OffsetX
Offset X,
Offset Y,
Width,
Height,
Pixel Format,
TimeStamp,
Line Status All,
ExposureTime,
Gain All,
Black Level All,
Sequencer Set Active,
Frame Trigger Counter,
Exposure Start Counter,
Fame Start Counter,
Frame Transfer End Counter,
Line Status All On FVAL Start,
Device Temperature,
Device Serial Number,
Device User ID
True, False False
Setting range
ー ー
Setting range
ー Geometry_1X_1Y
— 53 —
Default value
Configure chunk control settings.
Set whether to enable ChunkData.
Select the ChunkData to be added.
Select whether to output ChunkData.
Default: Only [ChunkImage] is [True].
Default value
PendingAck function test command.
The camera waits for TestPendingAck (ms)
time and returns an Ack response.
Default value
Display information on transport layer
control.
Display the payload size.
Set the transfer method (tap configuration)
of images transferred from the camera at
one time.
GO-5100MP-USB
Description
Description
Description