Step 3:Verifying Camera Operation; Step 4:Verifying The Connection Between The Camera And Pc - JAI GO-5100MP-USB User Manual

GO-5100MP-USB
Step 3: Verifying Camera Operation
When power is supplied to the camera while the necessary equipment is connected, the
POWER/TRIG LED at the rear of the camera lights amber, and initialization of the camera
starts.When initialization is complete, the POWER/TRIG LED lights green.
Verify whether power is being supplied to the camera by checking the rear LED.
When properly turned on
Lit green
* For details on how to read the LEDs, see "LED status and camera status" in the "Parts
Identification" section.
Step 4: Verifying the Connection between the Camera
and PC
Verify whether the camera is properly recognized via eBUS Player for JAI.
Connecting the Camera to eBUS Player for JAI.
1
Startup eBUS Player for JAI
eBUS Player for JAI startup screen appears.
— 14 —